- Xecuter x360usb pro drivers is the world's first SATA to USB Mass-Storage controller released by Xecuter Team.It not only enables WINAPI over USB, but also PORTIO.X360USB PRO is a powerful all-in-one converter can be used with any software or hardware that uses these signals to work.This adapter is the most advanced WINAPI/PORTIO to USB adapter.
- The J-R Programmer V2 is also fully upgradeable and can be programmed using the Xecuter X360USB PRO Update app. Onboard LED's indicate Power and BootLoader mode. RED LED: Bootloader Mode (Switch to the left) GREEN LED: J-R Programmer Mode (Switch to the right) RED LED FLASHING: R/W Activity & POST Activity (Switch to the right) Features: Fast.
This guide will help you install X360 USB PRO drivers on windows so your ready to go ENJOY.
Drivers Security Pro
X360USB PRO Install Guide Download wlan driver for windows 10.
1: Download the latest drivers from http://www.x360usb.com/downloads.html
Driver XECUTER NAND-X UPDATE CABLE (COM2) For Windows 10 64-bit 487462e4f8 Xecuter Nand X Update Cable Com3 L831.124For Windows 10 64 bit2/10/201512/30.
2: Extract the driver files from the .zip file
3: Make sure the switch on the X360USB is set to the OFF position (ON = bootloader mode, used for updating the X360USB)
4: Connect the provided USB cable to the X360USB and your PC
– The extra AUX power cable is only to be used if your USB ports do not output 500mA
– In this case, you use both cables to power the X360USB
– 99% of computers operate at 500mA so it will be very rare to use this cable.
Some of the driver files will now install automatically. Once finished, the remaining driver has to be installed manually.
5: Open device manager, Right-Click on X360USB PIO, and choose Update Driver Software…
6: Browse your computer for the driver files you extracted in step 2
7: Click Next
8: Ignore the Windows security warning, and choose to install the driver software anyway
9: Double check in Device Manager, to see that the driver installed correctly.SOURCE – TEAM XECUTOR
OTHER USEFULL LINKS
Drivers Xerox
– How to download X360 USB PRO Tools and Drivers
Source – Team Xecutor
The following two tabs change content below.Ryan Oneill
- OnePlus 7 Pro Best Hidden Features – Tips And Tricks – May 20, 2019
- OnePlus 7 Pro Gaming Benchmarks – May 20, 2019
- Samsung Galaxy S10 Plus Long Term Review – May 20, 2019
As part of the team who are extensively involved in the programming of DVD firmware, we have been able to develop the most stable and solid 360 DVD to USB converter that you could ever possibly wish for. Gone are the days of Sata cards and disabling VIA drivers and messing around with x64 issues. Simply plug in your drive to your USB port and go. Supports all Hitachi, Samsung, Benq & Liteon DVD Drives ! Finally this is now open to all from beginners to hard core enthusiasts.
The prototypes we have been working with are obviously very roughly made – but we are about a week or so away from a final test prototype and production should begin soon. There will also be custom software which is also in development.
Just to give you guys a heads up, at this stage we are looking at a maximum RRP of $59.95 / £39.95 / €44.95
We hope to be shipping the first samples to exclusive testers and review sites at the end of next week, then full retail shipping will commence soon after that.
X360USB PRO has been successfully integrated into Jungle Flasher.
Here is a sneak peak of screenshots with a bunch of different drive versions.
Liteon Slim 0225 - Successful Key Dump.
Our goal was the make this the easiest possible way to connect your 360 DVD drive to your PC with full access to all features with No gimmicks. No fuss. Just plug it in and go. That's it, end of story.
* 360 DVD Drive Progress:
Hitachi (All Versions) Read: Done
Hitachi (All Versions) Write: Done
Samsung (All Versions) Read: Done
Samsung (All Versions) Write: Done
Benq (All Versions) Read: Done
Benq (All Versions) Write: Done
Liteon 74850 Read: Done (CK3 Probe (v1 or v2) still required)
Liteon 74850 Write: Done
Liteon 83850 V1 Read: Done
Liteon 83850 V1 Write: Done
Liteon 83850 V2 Read: Done (MRA Hack still required: CK3 Probe 2, LT Switch or LT Clip)
Liteon 83850 V2 Write: Done
Liteon 93450 Read: Done (MRA Hack still required: CK3 Probe 2, LT Switch or LT Clip)
Liteon 93450 Write: Done
* We are also testing the new Slim LT Firmware with the X360USB. Can anyone else claim that?
Slim 9504 Read: Done (No Probe / No Cutting / No Soldering Required - Confirmed)
Slim 9504 Write: Done (No Probe / No Cutting / No Soldering Required - Confirmed)
Slim 0225 Read: Done (No Probe / No Cutting / No Soldering Required - Confirmed)
Slim 0225 Write: In Progress
Slim 0500 Read: In Progress
Slim 0500 Write: In progress
* 0800 Game Ripping:
Tested 100% with Samsung, Benq & Liteon. It's pretty fast too
Tested on various desktops and laptops. No drivers required. No SATA required. All Windows Versions (That JF Supports anyway)
This chart should help clarify all your connection options and comparisons against SATA. Note that you have MANY options to power your drive. We understand that most users already have a CK3 Pro or a Blaster CK3 so we do not include this option with the X360USB Pro - why pay more if you already have paid for it in the past ? We will of course include CK3 Power options built into the X360USB on a separate version for new customers.